Description
Specifications
- Model: Cinelog35 V2 Analog
- Frame: GEP-CL35 V2
- Wheelbase: 142mm
- Gimbal Plate: 2.0mm
- Top Plate: 3.5mm
- Bottom Plate: 1.5mm
- FC system: GEP-F722-45A AIO V2
- MCU: STM32F722RET6
- Gyro: ICM 42688-P
- OSD: Betaflight OSD w/AT7456E chip
- ESC: 8Bit 45A
- VTX: GEPRC RAD 1W(UFL)
- Camera: Caddx Ratel2
- Antenna: GEPRC Peano 5.8 RHCP UFL
- Motor: SPEEDX2 2105.5-2650KV (6S)
- Propeller: HQProp D-T90MM
- GPS: GEP-M10
- CineLog35 V2 Analog TBSNanoRX weight: 263.8g
- Receiver: PNP, GEPRC ELRS2.4G, TBS Nano RX
- Recommended battery: LiPo 1050mah-1300mah
- Flight time: 5min -8′ 30min
Includes
1 x CineLog35 V2 Analog
2 x HQProp D-T90MM（2 pairs）
2x M20*250mm battery strap
2 x Battery Silicone Pads
1 x Set of screws
1 x L-shaped screwdriver (1.5mm)
1 x L-shaped screwdriver (2mm)
1 x L-shaped screwdriver (3mm)
1 x M5 wrench
1 x plastic tweezers
1 x Antenna fixed tube (pair)
1 x Keychain
1 x GP Camera Mounting Base
1 x Naked GP Camera Mounting Base
1 x Antenna Mounting Base
Screw package includes:
2x cup head screws M2*18
2x round head screws with pad M2*5.5
1x round head screws M2*12
2x Rivet nut M2
4x round head screws M2*8
4x round head screws M2*7
4x round head screws M2*6
2x round head screws M2.5*6
2x hexagonal screw M1.6*8
1x Flange nuts M5
2x Press Rivet Nuts_Brass color M2*1.9-OD4.9
2x Iron nut M2
2x Iron nut M2
2x Camera gimbal shock absorbing rubber
